5L tin of Ecobor II Wood Preservative Gel
Ecobor II Wood Preservative Gel - 5L

No votes have been submitted yet.

£75.42
Availability:
In stock
Out of stock

Ecobor II is a special boron-based and Benzalkonium chloride brushable and injectable gel. For use in high risk areas to treat against dry and wet rot as well as wood destroying insects.

SKU
ECOBORGEL
Brand
Category
Container Size

Product Description

Ecobor II Wood Preservative Gel

Ecobor II is a special boron-based and Benzalkonium chloride brushable and injectable gel. For use in high risk areas to treat against dry and wet rot as well as wood destroying insects.

Ecobor II has been designed for use on all timbers at high risk of damage or decay such as joist ends, purlins, wall plates, cut ends and rafter ends
.
Ecobor II leaves no surface residues after treatment, is non-staining and can be overpainted in time.
 

Features

  • Brushable and injectable multi-use gel
  • Excellent highly penetrating preservative for the control of wood - rotting fungi and wood boring insects
  • Approved under COPR 1986 for use as a wood preservative 
  • 20% Disodium octaborate tetrahydrate as the active ingredient with Benzalkonium chloride
  • Clean, easy to handle and virtually non-drip
  • A clear and non-staining preservative gel
  • Odourless and non-flammable
  • Permanent protection because the active ingredient does not break down
  • Convenient pack sizes

DIRECTIONS FOR USE

 

Treatment of wood boring insects and fungal decay:

 

1. Clean all wooden surfaces using a brush or vacuum cleaner.

2. To aid brushing out on any timbers, which are very dry or remain dusty, apply a little water to the surface before the application of ACS Ecobor II.

 

3. Apply a generous brush coat of ACS Ecobor II, taking care to ensure that end grains, corners and joints are well treated. Brush apply to any surfaces exposed by cutting after initial treatment.

 

4. Brush the ACS Ecobor II well into the surface taking care not overload the brush with the product, particularly on overhead, horizontal faces.

 

5. ACS Ecobor II may be used in outdoor conditions provided that the timber treated is then protected from weathering by an appropriate coating or sealant.

 

 

6. As a surface application the gel will not penetrate through paint, varnishes or other coatings and these should be removed before treatment. ACS Ecobor II can be injected through predrilled holes in areas where paint and coatings cannot be removed.

7. Clean all tools, brushes and equipment with water.

 

COVERAGE

By brush : 1 litre to 2 - 2.5 m2 of timber surface

Large dimensional timbers may need more than one coat or additional treatment with Boracol B40/1 Paste.

By injection : Apply as necessary or until refusal through predrilled holes.

 

Packaging

Available in a 5 litre tin.

 

Shelf life & storage

  • Twelve months in unopened, sealed containers.
  • Store in original packaging, unopened or sealed in a dry, safe place.
  • Keep out of reach of children.
  • Keep away from food, drink and animal feedstuffs.
  • Viscosity may be reduced at elevated temperatures.

 

Health & Safety

ACS Ecobor II is approved under the HSE COPR 1986 for use as directed HSE No: 6838. Refer to Safety Data Sheet (SDS) for the product. Use only as a wood preservative. Keep away from children and always read the label.

Information given is in good faith based on experience and usage, however all recommendations are made without warranty or guarantee, since the conditions of use are beyond our control. All goods are sold in accordance with our Conditions of Sale, copies of which are available on request. Customers are advised that products, techniques and codes of practice are under constant review and changes occur without notice, please ensure you have the latest updated information.

ECOBOR_20_TECH.pdf (354.93 KB)