Tanking Slurry Kit 10 x 25kg

Construction Chemicals Tanking Slurry Kit - 10 x 25kg

Over 1 million kilos sold. The best-quality tanking slurry on the market.

This Kit Contains

• 10 x 25kg of Tanking Slurry - covers 60 squre metres
• 1 x 25  litres of SBR Bonding Agent
• 1 x  60mm Mixing Paddle
• 2 x 10mm Block Brush

All the kit you need to start waterproofing your basement! 

Construction Chemicals Tanking Slurry is THE industry-leading product for dealing with below-ground damp and moisture. We have sold over a million kilos without a failure. We put this down to the fact that, as manufacturers, we have total control of the raw materials we use and our manufacturing process. Many of our competitors source their tanking slurries form third parties abroad and cannot stand by their products as confidently as we can. No other tanking slurry on the market is as successful or as dependable as ours.

Here are some of the features that you won't find in other products:

• Our formulation contains hydrophobic polymers to give excellent water resistance, flexibility and adhesion.
• Incorporating glass fibres helps to prevent shrinkage and improves flexibility.
• The special cements we use have shrinkage compensation and also help to achieve a consistent setting time.
• Ground salts in existing buildings can cause problems however by including microsilica we have reduced these effects and also achieved a dense, close-packed product.

Using Construction Chemicals Tanking Slurry to convert a damp cellar into usable accommodation is a consideration many people have taken when the cost of property has been increasing and during the current difficult market. We believe that by using our product the householder can have every confidence that they will achieve their aim and add value to their home. If you are considering carrying out below ground waterproofing we can also help by writing a dedicated specification. Providing we have information on the current state of the project we can write the specification, detail the quantity of products required and give a cost for the materials. Feel free to call us on 0116 2301955.

Further Information

Construction Chemicals Tanking Slurry is the ideal waterproofing solution for cellar and basement conversions as well as bund walls. It is also suitable in providing a waterproof damp proofing barrier where damp proof course treatment may not be possible. The product is made up of many components, which give high water resistance, flexibility, salt resistance, good adhesion, set control in a form that only requires water for mixing.

Features

• Tried and tested over may years with no failures
• Tanking Slurry forms part of the original substrate
• High quality polymers give flexibility, salt resistance and good adhesion
• Unlike some products all the ingredients for this product to work are in the bag, the operator only requires water for mixing
• High alumina cement gives good salt resistance

As a final note, we offer these kits at a significant discount over individual bags of tanking. We are unable to accept returns of part of a kit. If you have any questions about this or how much you will need, please call us on 0116 230 1955. 

Cement Based Powders Health & Safety Data Sheet

Delivery Information

We offer free UK mainland delivery. If you are not on the mainland, please give us a call on (0116) 230 1955 and we can give you an accurate delivery price. We make deliveries to Europe and to the rest of the world.

Please call us on (0116) 230 1955 to discuss an accurate shipping price. In certain cases, deliveries to the Highlands of Scotland & Northern Ireland may incur extra shipping costs. If such a situation arises, we will call you as we process the order in order to discuss this.

Returns 

Hopefully you won't need to return an item, however, if you do, it is our aim to make this as simple as possible. By following the guidance below you can help us to help you when a product is not what you expected, or is faulty. Your statutory rights are not affected by this guidance.

If you have any questions please call our customer service team on 0116 230 1955 or email us at sales@constructionchemicals.co.uk

How to Get Items Ready for Return

Under our 30 Day Returns policy you can return faulty or unwanted goods.

Items should be unused, in a saleable condition, in original packaging and with all component parts and any promotional items received. You should include your invoice.

Faulty Goods

In the unlikely event that goods are faulty then we will replace them free of charge.

Unwanted Goods

Unwanted goods can be returned at the cost of the purchaser & will incur a 20% restocking charge. 

Certain items are excluded from the guarantee. These include goods that are made to order,or mixed to your requirements. Other excluded items are macerators and water pumps as well as parts of larger kits.

How to Return an Item

There are four common ways to return an item:

1. For items under 1m in length & 2kg in weight, send them back from your local post office 
2. For larger items, call our customer service team on 0116 2301955 for further advice
3. We also offer a carrier pick up service, however, depending on the circumstances, this may incur a charge. For more information call our customer service team on 0116 230 1955
4. For products delivered directly from our suppliers, please call our customer service team on 0116 2301955

Time After Purchase

If you purchased the item less than 30 days ago you can return it under our 30 Day Returns policy

If you purchased the item more than 30 days ago our aim is to get the problem put right as quickly as possible. In most instances we will either offer a replacement item with the same or an equivalent product.

If the item has already been installed, call us on 0116 230 1955 for further advice.

Expert Support

It can be difficult getting it right for your project & so we'd like to offer two ways of helping. The first is telephone support, the second is project specification for contractors.

Telephone Support

We aim to win with customer support. We have experts you can ask & we want your custom. Please call us on:

0116 230 1955

Monday to Friday 9am - 5pm

Free Product Specification Service for Contractors

In order to assist our customers with their projects, we are happy to offer a free Project Specification Service to ensure that contracts and work are specified correctly  and the list of materials required is as accurate as possible. Our Technical Team has many years experience in Dampproofing, Tanking and Waterproofing situations both here and abroad.

We recognize that our customers are involved in large & complicated projects, our aim to offer a service to help them get it right.

The benefits of the project specification service are:

• Appraisal of the requirements of your project from an expert
• One to one Conversation with the Technical Team, if required
• A free specification for project planning purposes
• A site visit if required
• A Professional Indemnity Insurance-backed specification for peace of mind

Please call us on:

0116 230 1955

or email us at sales@constructionchemicals.co.uk

We Have Our Own In-house Chemist

This gives our customers access to first-class technical advice just by picking up the 'phone or emailing. We offer an unrivalled technical service that aims to give our customers the information they need to carry out their work with the right materials. This gives them and their customers confidence.

 We Have Local, UK-wide Coverage

We have 3 depots covering the whole of the UK. This benefits our customers because they can arrange for local pick-ups, they get faster, more flexible deliveries, & we have large stocks readily available.

We Have Our Own Transport Network

For a great many of our products, we offer a personal delivery service, giving faster delivery, more security & less frustration.

We Manufacture Our Own Products

We have control over our products and manufacture to a consistent specification. This means that our customers can expect the same high-quality materials, time and again.

Our Directors Have Over 100 Years of Experience in the Industry

This provides our customers with first-class technical advice & a first-rate service & a team that understands your needs & your working environment.

We Have an Experienced Team of Office Staff

All of our staff have worked for us for many years & know their products & have technical expertise. The quality of support is far superior to DIY chains and to our online competitors.

All Non-Construction Chemicals Products are Sourced from ISO 9000 Companies

This means that all goods for sale from Construction Chemicals are of the highest quality. We only work with companies that have a proven track record.

 We Have a Large, Experienced Sales & Technical Support Team

Our sales & technical support staff cover the whole of the UK enabling you to get the materials you want for the job you need to complete, when you want to.

 We Offer Multiple Credit Options

We offer full credit, credit card & PayPal facilities making it easier for customers to buy and for trade customers to keep an account.

We Stand by the Quality of Our Products & Our Relationship With Our Customers.

If a customer is not happy with their products, we will replace them without question.