Danish Oil

Contains Tung Oil, blended with resins and solvents, offering an ideal treatment for Mahogany, Teak and Oak Excellent for wood turning. It does not leave a thick film, peel, chip or craze.

Always do a test area before starting any project to assess product suitability and final finish. Follow the manufacturer's instructions on the tin at all times.

Fiddes Hard Wax Oil Tints is ready-to-use from the tin, do not thin. Stir thoroughly before and periodically during application. Fiddes Hard Wax Oils dry via oxidation so it is important to ensure good ventilation during application and drying.

Application to Wood floors
The ideal application tool is a firm, fine, natural bristle brush, however the key to a great finish is thin application with removal of any surplus with a clean, lint free cloth.

Apply first coat thinly and evenly along the wood grain
Remove surplus oil with a clean, lint-free-cloth and allow to dry (4 hours)
Lightly de-nib (lightly sand) the surface, then vacuum to remove all traces of dust
Repeat above steps for second coat
Application to Cork floors
Cork tiles are best treated before fitting to avoid overlapping treatment of edges which would lead to prolonged drying times. A cork floor treated with Fiddes Hard Wax Oil Tints will get a robust, elastic and wear-resistant surface which will harden further over several weeks. Due to the extreme absorption power of this highly elastic, natural, material we recommend the following procedure:

Apply first coat very thinly with a broad varnish scraper, or for smaller areas a natural bristle brush
The Hard Wax Oil should immediately absorb into the surface
Leave to dry for at least 24 hours
Apply second coat, again very thinly
Remove excess with cloth immediately
Leave to dry for at least 24 hours
Finishing
Fiddes Hard Wax Oil Tints can be intermixed to produce unique colours. For a more translucent finish add clear Hard Wax Oil. Here are some tips for achieving different effects:

For lighter a shaded finish: Apply a single coat of Hard Wax Oil Tints then finish with a clear coat of Fiddes Hard Wax Oil, or if you have used the white tint, use Fiddes Hard Wax Oil Natural to stop the white from yellowing
For increased colour depth: Apply two coats of Hard Wax Oil Tints
To change the sheen from a satin finish: Apply Matt or Gloss from the Clear Hard Wax Oil range to create the desired level
Aftercare
Regular Cleaning
For day to day cleaning, surfaces treated with Fiddes Hard Wax Oil Tints can be dry wiped, swept or vacuumed.

Deep Cleaning
To clean surface scuffs, marks and stains, use Fiddes Floor Surface Cleaner and a damp (not wet) microfibre cloth or mop.

Repair
Scuffs, stains, marks and minor scratches can be quickly and easily repaired.

Minor Blemishes can usually be removed by buffing with a dry or damp microfibre cloth
Light damage such as stains can be easily repaired by lightly sanding and re-applying a fresh coat of Hardwax Oil
Heavy damage including scratches can be easily 'repaired' by sanding the affected area, back to the bare wood if necessary and re-applying a fresh coat of the Hardwax Oil