EVT Hybrid-Adhesive 007 - 310ml, Black
£8.45
Availability:
In stock
Out of stock
EVT 007 HPHA is used for miscellaneous bonding and the sealing of seams and joints in the construction of buildings (including glass and mirror assemblies, the latter in accordance with DIN regulation 1238), vehicles,train wagons and ships, as well as inmechanical, electrical and ventilation engineering and air conditioning technology. It may also be used on floor joints. Depending on the stability of the surface, EVT HPHA 007 is suitable for interior and exterior use; it may be used on damp surfaces. HPHA 007 creates elastic bonding between concrete, stone and brickwork, metals, plastics, wood, ceramics and marble.
Product Description
Properties
HPHA 007 reacts with air moisture, has a low odour and is free from isocyanates and solvents. It remains permanently elastic, is high UV-resistant, non-ageing and weatherproof.
EVT HPHA 007 must not be used for the construction of aquariums. For this application, please order EVT Aquarium HPAq.
Application
Apply with a hand operated, battery operated or air pressure EVT dispensing gun; then smooth the joint surface with the use of a trowel or your finger and EVT Surface Finishing Agent.
Storage
In cool and dry environments, EVT 007 HPHA can be stored for at least 12 months.
Characteristics
For indoor use.
Single-component, elastic sealant based on hybrid polymer
Neutral curing, non-corrosive
Low odour formulation, solvent- and silicone-free
Ageing- and weather-resistant, good UV resistance
Compatible with paints
Very good adhesion to most substrates in construction areas, including slightly wet substrates (rain-resistant after being fully cured)
Very low shrinkage
Applications
At least one of the substrates to be bonded should be water-permeable (concrete, wood).
Inside and outside
Suitable for most substrates as wood, metal (e.g. stainless steel, aluminium, copper), and glass.
For bonding of skirting boards and decorative strips.
For elastic bonding and mounting of air ducts and for bonding and sealing of ceramic substrates (e.g. tiles).
Technical data
Curing system: neutral curing.
Curing speed (+23°C, 50% RH, cross-section of joint 10x10mm): 2 mm per day.
Movement capability: 12.5%.
Temperature resistance: -40°C to + 80°C.
Skin formation time (+23 °C / 50% RH): 25min.