Tanking Slurry
Free Delivery

Free Delivery


Construction Chemicals is offering FREE UK mainland delivery to all customers. Get the best products with FREE delivery.

Tanking Slurry - 25kg

Tanking Slurry - 25kg


Over 1 million kilos sold. The best-quality tanking slurry on the market.

Construction Chemicals Tanking Slurry is THE industry-leading product for dealing with below-ground damp and moisture. We have sold over a million kilos without a failure. We put this down to the fact that, as manufacturers, we have total control of the raw materials we use and our manufacturing process. Many of our competitors source their tanking slurries form third parties abroad and cannot stand by their products as confidently as we can.

No other tanking slurry on the market is as successful or as dependable as ours.

Here are some of the features that you won't find in other products:
- Our formulation contains hydrophobic polymers to give excellent water resistance, flexibility and adhesion.
- Incorporating glass fibres helps to prevent shrinkage and improves flexibility.
- The special cements we use have shrinkage compensation and also help to achieve a consistent setting time.
- Ground salts in existing buildings can cause problems however by including microsilica we have reduced these effects and also achieved a dense, close-packed product.

Using Construction Chemicals Tanking Slurry to convert a damp cellar into usable accommodation is a consideration many people have taken when the cost of property has been increasing and during the current difficult market. We believe that by using our product the householder can have every confidence that they will achieve their aim and add value to their home.

If you are considering carrying out below ground waterproofing we can also help by writing a dedicated specification. Providing we have information on the current state of the project we can write the specification, detail the quantity of products required and give a cost for the materials. Feel free to call us on 0116 2301955.


Further Information

Construction Chemicals Tanking Slurry is the ideal waterproofing solution for cellar and basement conversions as well as bund walls. It is also suitable in providing a waterproof damp proofing barrier where damp proof course treatment may not be possible. The product is made up of many components, which give high water resistance, flexibility, salt resistance, good adhesion, set control in a form that only requires water for mixing.

Unlike other Tanking Slurries seen on the Internet this product does not need the addition of an SBR Bonding Agent Our Tanking Slurry has a pre-mixed polymer therefore eliminating the need, and extra expense, of adding polymer (SBR) to ensure optimum performance.

Features
- Tried and tested over may years with no failures
- Tanking Slurry forms part of the original substrate
- High quality polymers give flexibility, salt resistance and good adhesion
- Unlike some products all the ingredients for this product to work are in the bag, the operator only requires water for mixing
- High alumina cement gives good salt resistance



Further Details
Tanking Slurry
Tanking Slurry Detailed Information & Health & Safety Data Sheet




Price:    £49.50
excluding  VAT

Quantity:  
Fillet Seal Barrier Mortar - 10kg

Fillet Seal Barrier Mortar - 10kg


Construction Chemicals Fillet Seal is a ready to use (just add water) hydrophobic, non-shrinking repair mortar. It is an integral part of the Construction Chemicals cellar or below ground Tanking System; Wall and floor, wall and wall junctions are vulnerable areas in any below ground tanking system. Fillet Seal is used to create a waterproof flexible fillet at wall/wall and wall/floor junctures.

Form Supplied: Powder
Pack Sizes: 10 Kg buckets
Colour range: Grey
Contains: Cement, polymers, and additives


Further Details
Fillet Seal
Fillet Seal Health & Safety Data Sheet




Price:    £32.10
excluding  VAT

Quantity:  
Tanking Slurry Kit

Tanking Slurry Kit


Over 1 million kilos sold. The best-quality tanking slurry on the market.

Contains 20kg Tanking Slurry, 2* 1ltr SBR Bondong Agent, 1 * 60mm Mixing Paddle, 1 * 10mm Block Brush

All the kit you need to start waterproofing your basement

Construction Chemicals Tanking Slurry is THE industry-leading product for dealing with below-ground damp and moisture. We have sold over a million kilos without a failure. We put this down to the fact that, as manufacturers, we have total control of the raw materials we use and our manufacturing process. Many of our competitors source their tanking slurries form third parties abroad and cannot stand by their products as confidently as we can.

No other tanking slurry on the market is as successful or as dependable as ours.

Here are some of the features that you won't find in other products:
- Our formulation contains hydrophobic polymers to give excellent water resistance, flexibility and adhesion.
- Incorporating glass fibres helps to prevent shrinkage and improves flexibility.
- The special cements we use have shrinkage compensation and also help to achieve a consistent setting time.
- Ground salts in existing buildings can cause problems however by including microsilica we have reduced these effects and also achieved a dense, close-packed product.

Using Construction Chemicals Tanking Slurry to convert a damp cellar into usable accommodation is a consideration many people have taken when the cost of property has been increasing and during the current difficult market. We believe that by using our product the householder can have every confidence that they will achieve their aim and add value to their home.

If you are considering carrying out below ground waterproofing we can also help by writing a dedicated specification. Providing we have information on the current state of the project we can write the specification, detail the quantity of products required and give a cost for the materials. Feel free to call us on 0116 2301955.


Further Information


Construction Chemicals Tanking Slurry is the ideal waterproofing solution for cellar and basement conversions as well as bund walls. It is also suitable in providing a waterproof damp proofing barrier where damp proof course treatment may not be possible. The product is made up of many components, which give high water resistance, flexibility, salt resistance, good adhesion, set control in a form that only requires water for mixing.

Features
- Tried and tested over may years with no failures
- Tanking Slurry forms part of the original substrate
- High quality polymers give flexibility, salt resistance and good adhesion
- Unlike some products all the ingredients for this product to work are in the bag, the operator only requires water for mixing
- High alumina cement gives good salt resistance


Further Details
Tanking Slurry Kit
Tanking Slurry Detailed Information & Health & Safety Data Sheet




Price:    £79.20
excluding  VAT

Quantity:  
Black Tanking Slurry for Koi Carp Ponds - 20kg

Black Tanking Slurry for Koi Carp Ponds - 20kg


Construction Chemicals Tanking Slurry is the ideal waterproofing solution for cellar and basement conversions as well as bund walls. It is also suitable in providing a waterproof damp proofing barrier where damp proof course treatment may not be possible. The product is made up of many components, which give high water resistance, flexibility, salt resistance, good adhesion, set control in a form that only requires water for mixing.

This product has been used to great effect when creating Koi Carp ponds

Features
- Tried and tested over may years with no failures
- Tanking Slurry forms part of the original substrate
- High quality polymers give flexibility, salt resistance and good adhesion
- Unlike some products all the ingredients for this product to work are in the bag, the operator only requires water for mixing
- High alumina cement gives good salt resistance

Further Details
Black Tanking Slurry for Koi Carp Ponds




Price:    £49.50
excluding  VAT

Quantity:  
Anti-Salt - 5 Litres

Anti-Salt - 5 Litres


ANTI SALT is a Chloride and sulphate salt neutraliser that converts water-soluble salts into insoluble or hardly soluble reactive compounds. As a result of this neutralisation, Chlorides and Sulphates, which are present in masonry, cannot be transported by the gauging solution used in slurry coat of tanking seal or to the surface of masonry. This in turn prevents salts transferring into tanking slurry when tanking below ground.

PRODUCT DATA
Base: Zinc florosilicate
Colour: Clear
Density: Approx 1.12kg/dm3
Application: Brush/Spray

INSTRUCTION FOR USE
ANTI SALT is supplied as a concentrate for dilution with water prior to use. Apply to the prepared substrate in two operations as follows:

1st operation
Dilute one part of ANTI SALT with two parts water and apply.

2nd operation
Allow a minimum of three hours following the first operation and then apply one part of ANTI SALT, which has been diluted with one part of water.

COVERAGE
Approximately 500ml will cover 1sq metre for two operations.

STORAGE
Keep container closed. Protect from frost. Once open the shelf life will be 12 months.

Read health and safety data sheet before use


Further Details
Anti-Salt
Anti-Salt Detailed Information & Health & Safety Data Sheet




Price:    £59.18
excluding  VAT

Quantity:  
SBR Bonding Agent

SBR Bonding Agent


Construction Chemicals SBR is a white styrene butadiene co-polymer used to improve the properties of cement renders, screeds and mortars. It is also used in conjunction with Construction Chemicals Tanking Slurry as a priming coat or tight render basecoat. Used with sulphate-resistant cement it will resist the movement of salts with in wall. SBR Bonding Agent will increase water and abrasion resistance. It also improves the durability of cement renders and has many other uses.

Features
- Ideal for screeds where under-floor heating has been installed
- Makes renders waterproof and gives flexibility
- Can be used as a primer
- Can be used for stone and concrete repairs


Further Details
SBR Bonding Agent
SBR Bonding Agent Detailed Information & Health & Safety Data Sheet



Size (prices exclude VAT)
25 Litres - £97.44
5 Litres - £25.50

Quantity:  
Water Seal - 10kg drum

Water Seal - 10kg drum


Construction Chemicals Water Seal is used in situations where sealing against live water or grout movement is required.

Areas of use include plugging of concrete panels and joint sealing prior to grouting operations, sealing of basements, concrete pipes, sewage systems and foundations.

Features
- Super fast curing (within 1 minute)
- Ideal for plugging water leaks in concrete pipes and below-ground situations


Further Details
Water Seal
Water Seal Detailed Information




Price:    £69.41
excluding  VAT

Quantity:  
Kair Heat Recover Ventilator - KHRVF 100

Kair Heat Recover Ventilator - KHRVF 100


Kair Trakmaster KHRVF100 Heat Recovery Ventilators provide a continuous air change, replacing stale
moisture-laden air with fresh, warmed air from outside.

When basements/cellars have been tanked and waterproofed condensation can often be problem, Kair
Trakmaster KHRVF100 will control these problems as well as condensation problems in small flats and bungalows and are an integral part of the Kair 'Hybrid' Heat Recovery Systems (See separate data sheet).
Features
- Meets Building Regulations requirements
- Up to 65% Heat Recovery
- Easy to install (no external access required - 102mm core drill)
- Whisper quiet Continuous running trickle ventilation
- Humidity sensor (preset or adjustable)
- Low running costs
- Tamperproof screws (See options for bit required for installation)
- Balanced or positive airflow
- Energy savings
- Security ventilationTM (no need to open windows)
- Health benefit - produces dramatic improvements of indoor air quality
- Continuous Running, Energy Efficient, Heat Recovery Ventilator For Flats, Bungalows, Kitchens and Bathrooms

Unlike conventional extractor fans which suck out and waste expensively produced heat, KairTM Trakmaster KHRVF100 Heat Recovery Ventilators recover up to 65% of exhaust heat, even when operating on boost mode. The world is becoming increasingly aware of the enormous cost of energy production, and this, plus the use of fossil fuels to generate power, is a momentous environmental issue. Extractor fans potentially waste over a million kilowatts of energy every year. This is comparable to the total output of two large power stations. Replacing conventional extractor fans with heat recovery systems could save at least half of that energy loss.


Further Details
Kair Heat Recover Ventilator
Kair KHRVF Technical Data Sheet




Price:    £605.00
excluding  VAT

Quantity:  
Kair Heat Recover Ventilator - KHRVF 150

Kair Heat Recover Ventilator - KHRVF 150


Kair Trakmaster KHRVF100 Heat Recovery Ventilators provide a continuous air change, replacing stale
moisture-laden air with fresh, warmed air from outside.

When basements/cellars have been tanked and waterproofed condensation can often be problem, Kair
Trakmaster KHRVF100 will control these problems as well as condensation problems in small flats and bungalows and are an integral part of the Kair 'Hybrid' Heat Recovery Systems (See separate data sheet).
Features
- Meets Building Regulations requirements
- Up to 65% Heat Recovery
- Easy to install (no external access required - 102mm core drill)
- Whisper quiet Continuous running trickle ventilation
- Humidity sensor (preset or adjustable)
- Low running costs
- Tamperproof screws (See options for bit required for installation)
- Balanced or positive airflow
- Energy savings
- Security ventilationTM (no need to open windows)
- Health benefit - produces dramatic improvements of indoor air quality
- Continuous Running, Energy Efficient, Heat Recovery Ventilator For Flats, Bungalows, Kitchens and Bathrooms

Unlike conventional extractor fans which suck out and waste expensively produced heat, KairTM Trakmaster KHRVF100 Heat Recovery Ventilators recover up to 65% of exhaust heat, even when operating on boost mode. The world is becoming increasingly aware of the enormous cost of energy production, and this, plus the use of fossil fuels to generate power, is a momentous environmental issue. Extractor fans potentially waste over a million kilowatts of energy every year. This is comparable to the total output of two large power stations. Replacing conventional extractor fans with heat recovery systems could save at least half of that energy loss.


Further Details
Kair Heat Recover Ventilator
Kair KHRVF 150 Technical Data Sheet




Price:    £290.53
excluding  VAT

Quantity:  
Radon Barrier Liquid Vapour Membrane - 10 Litres

Radon Barrier Liquid Vapour Membrane - 10 Litres


Construction Chemicals Liquid Vapour Membrane is used as a waterproofing membrane giving high flexibility and good bonding.

Construction Chemicals Radon Barrier (methane gas) is an SBR-based co-polymer liquid applied membrane that provides a seamless Radon Barrier (methane gas) and damp proof membrane that meets current building regulations.

Features
- Waterproof membrane
- Effective radon barrier (methane gas)
- Ready mixed and ready to use
- Bonds to most construction surfaces


Further Details
Radon Barrier Liquid Vapour Membrane
Radon Barrier Liquid Vapour Membrane Detailed Information




Price:    £55.99
excluding  VAT

Quantity:  
Block Brush 5 1/2

Block Brush 5 1/2"


Block Brush with pure bristle, stainless ferrule and moulded plastic handle with bucket rest. Ideal for use as a, emulsion and Slurry brush. 140mm x 40mm

Further Details
Block Brush




Price:    £4.95
excluding  VAT

Quantity:  
Mixing Paddle - 120mm

Mixing Paddle - 120mm


Used in power drills with 1/2" capacity chucks

For mixing tanking slurry. Also used for plaster, render, paint, adhesives, mortar, paste and screed.

Size. 120mm x 600mm long


Further Details
Mixing Paddle




Price:    £6.82
excluding  VAT

Quantity:  
MULTI-USE WATER BASED EPOXY COATING - 5 litres

MULTI-USE WATER BASED EPOXY COATING - 5 litres


A two-coat application of non toxic epoxy paint, a system that can be used in damp conditions.

CONSTRUCTION CHEMICALS WATER BASED EPOXY is a water dispersible epoxy coating suitable for all applications where concrete or masonry requires waterproofing and protection. It is applied in the same manner as ordinary paint with the added benefit of application in damp conditions.
Once cured CONSTRUCTION CHEMICAL WATER BASED EPOXY leaves a tough, non toxic, waterproof, easy to clean surface.

USES
1. As a membrane to prevent rising damp in floors.
2. As a general waterproofing and decorative finish for all brick, concrete, cement and masonry surfaces.
3. As a sealing coat for asbestos containing materials.
4. Wall coating in areas of food manufacture and storage, i.e. Dairies, Gain Silos, Breweries.
5. As a tank lining for protection against chemicals, i.e. bund walls.
6. Basements and cellars in need of waterproofing where features need to be in view.
7. Newly laid concrete floors where speed is required to lay wood floors or tiles.
8. For application to damp surfaces where other paints or coatings will not adhere.
9. As a hard wearing epoxy finish to industrial and domestic floors, available in many colours including a clear finish.
10. As a barrier between Anhydrite and Gyvlon screeds when cement based adhesives are to be used.



Further Details
Multi-Use WB Epoxy Coating Further Information



Colour
Colour

Price:    £75.40
excluding  VAT

Quantity:  
Ask John Ask John
If you have any questions, please email our in-house chemist - John Oxley B. Tech, C. Chem, M. R. S. C. at:john@constructionchemicals.co.uk John has a wide range of knowledge and a lifetime of experience with using and preparing these products and will be happy to take your enquiries.We aim to respond to all enquiries within 24 hours (Monday to Friday).If you would prefer to talk over the 'phone, you can reach John directly on 07766 426545 during office hours (9am - 5pm Monday - Friday). If you have a general sales enquiry, please call our head office on 0116 230 1955.

 




 



 
Oxalic Acid
1. Oxalic Acid

Size - prices exclude VAT

Quantity:

Envirosafe One Shot Injection Cream (DPC)
2. Envirosafe One Shot Injection Cream (DPC)

Size (prices exclude VAT)
5 Litres - £68.20
2 * 5 Litres - £67.10 each
5 * 5 Litres - £60.50 each
1 * 1 Litre - £17.16
6 * 1 Litre - £16.94 each
12 * 1 Litre - £16.50 each
380cc cartridge - £10.45
5 * 380cc cartridges - £8.64 each
10 * 380cc cartridges - £7.81 each

Quantity:

Tanking Slurry - 25kg
3. Tanking Slurry - 25kg


Price:    £49.50
excluding  VAT

Quantity:

Wood Weld PU - 310ml
4. Wood Weld PU - 310ml

Number of Cartridges (prices exclude VAT)
One (£7.15)
Box of 12 (£5.48 per cartridge)
5 Boxes of 12 (£4.95 per cartridge)
11 Boxes of 12 (£4.40 per cartridge)

Quantity: