Home Page
|
Terms & Conditions
|
View Basket Contents
|
Go to the Checkout
|
Contact Us
We value your feedback
Click here to make suggestions
Fillet Seal Barrier Mortar - 10kg
A ready-to-use Fillet Seal and bridging mortar for use in conjunction with Construction Chemicals Tanking slurry. Fillet Seal should be incorporated in all floor and wall joints both horizontal and vertical. Fillet Seal will seal vulnerable floor and wall joints and give a permanent flexible joint.
Fillet Seal should be applied across the joint after the first coat of tanking slurry, apply as a fillet of 25mm, smooth with a trowel before applying a second coat of tanking thus sandwiching the fillet in.
We manufacture here in the UK so we are in control of quality and production, We use only top quality polymers to give excellent adhesion.
Features
- Ready mixed in 25kg bags - just add water
- Provides a waterproof joint
- Gives flexibility in areas of high vibration or movement
- Can be used for filling small holes & cracks
- 1kg of Fillet seal will cover 1 metre run of 25mm fillet
Description
Construction Chemicals Fillet Seal is a ready to use (just add water) hydrophobic, non-shrinking repair mortar. It is an integral part of the Construction Chemicals cellar or below ground Tanking System; Wall and floor, wall and wall junctions are vulnerable areas in any below ground tanking system. Fillet Seal is used to create a waterproof flexible fillet at wall/wall and wall/floor junctures.
Form Supplied: Powder
Pack Sizes: 25 Kg bags
Colour range: Grey
Contains: Cement, polymers, and additives
Properties
Forms a water resistant mortar seal that does not shrink and has excellent adhesion to concrete and mortar. Can be used as a general repair mortar where shrinkage must be avoided. Construction Chemicals Fillet Seal has a long pot life, typically 5 hours ensuring that wastage is kept to a minimum.
Usage
Construction Chemicals Fillet Seal should be applied to a damp substrate. When using with the Construction Chemicals Tanking System, apply a 25 mm fillet into all vertical and horizontal joints. It should be applied onto the first coat of
Tanking before it has cured. This will typically be around 1 hour after the application of the Tanking slurry. Care should be taken not to damage the underlying coating.
Allow the Fillet Seal to stiffen for 2 - 3 hours and then apply the second coat of Tanking Slurry to the substrate and over the Fillet Seal. Fillet seal can also be used for filling small holes.
Fillet Seal can also be used as a general repair compound for patch filling of masonry, walls and floors. When cured it has a compressive strength of >40N/mm2.
Do not use in when temperatures are below 5 degrees C.
Coverage
When used as a 25 mm fillet around 1 kg per linear metre will be required. When used as a repair compound 25 kg mixed with water will produce around 15 litres of mortar.
Shelf Life
12 months when stored unopened and above ground in cool dry conditions.
Health & Safety
" R36 Irritating to skin.
" R41 Risk of serious damage to eyes.
Contact between cement powder and body fluids (e.g. sweat and eye fluids) may cause irritation, dermatitis or burns. There is a risk of serious damage to eyes. Wear suitable protective clothing, gloves and eye/face protection. In case of contact with eyes, rinse immediately with plenty of clean water and seek medical advice. After contact with skin wash immediately with plenty of clean water. Keep out of reach of children.
For full health and safety information see Safety Data Sheet.
Fillet Seal Health & Safety Data Sheet
Price:
£32.10
excluding VAT
Quantity:
1.
Oxalic Acid
Size - prices exclude VAT
25 kg - £77.00
5 kg - £22.00
Quantity:
2.
Envirosafe One Shot Injection Cream (DPC)
Size (prices exclude VAT)
5 Litres - £68.20
2 * 5 Litres - £67.10 each
5 * 5 Litres - £60.50 each
1 * 1 Litre - £17.16
6 * 1 Litre - £16.94 each
12 * 1 Litre - £16.50 each
380cc cartridge - £10.45
5 * 380cc cartridges - £8.64 each
10 * 380cc cartridges - £7.81 each
Quantity:
3.
Tanking Slurry - 25kg
Price:
£49.50
excluding VAT
Quantity:
4.
Wood Weld PU - 310ml
Number of Cartridges (prices exclude VAT)
One (£7.15)
Box of 12 (£5.48 per cartridge)
5 Boxes of 12 (£4.95 per cartridge)
11 Boxes of 12 (£4.40 per cartridge)
Quantity:
