Tanking Slurry - 25kg

Construction Chemicals Tanking Slurry is the ideal waterproofing solution for cellar and basement conversions as well as bund walls. It is also suitable in providing a waterproof damp proofing barrier where damp proof course treatment may not be possible. The product is made up of many components, which give high water resistance, flexibility, salt resistance, good adhesion, set control in a form that only requires water for mixing.

Features
- Tried and tested over may years with no failures
- Tanking Slurry forms part of the original substrate
- High quality polymers give flexibility, salt resistance and good adhesion
- Unlike some products all the ingredients for this product to work are in the bag, the operator only requires water for mixing
- High alumina cement gives good salt resistance

Tanking Slurry Detailed Information & Health & Safety Data Sheet

Price: £45.00
excluding VAT

Quantity:

Tanking Slurry Kit

Contains 20kg Tanking Slurry, 2* 1ltr SBR Bondong Agent, 1 * 60mm Mixing Paddle, 1 * 10mm Block Brush

All the kit you need to start waterproofing your basement

Construction Chemicals Tanking Slurry is the ideal waterproofing solution for cellar and basement conversions as well as bund walls. It is also suitable in providing a waterproof damp proofing barrier where damp proof course treatment may not be possible. The product is made up of many components, which give high water resistance, flexibility, salt resistance, good adhesion, set control in a form that only requires water for mixing.

Features
- Tried and tested over may years with no failures
- Tanking Slurry forms part of the original substrate
- High quality polymers give flexibility, salt resistance and good adhesion
- Unlike some products all the ingredients for this product to work are in the bag, the operator only requires water for mixing
- High alumina cement gives good salt resistance

Tanking Slurry Detailed Information & Health & Safety Data Sheet

Price: £72.00
excluding VAT

Quantity:

SBR Bonding Agent

Construction Chemicals SBR is a white styrene butadiene co-polymer used to improve the properties of cement renders, screeds and mortars. It is also used in conjunction with Construction Chemicals Tanking Slurry as a priming coat or tight render basecoat. Used with sulphate-resistant cement it will resist the movement of salts with in wall. SBR Bonding Agent will increase water and abrasion resistance. It also improves the durability of cement renders and has many other uses.

Features
- Ideal for screeds where under-floor heating has been installed
- Makes renders waterproof and gives flexibility
- Can be used as a primer
- Can be used for stone and concrete repairs

SBR Bonding Agent Detailed Information & Health & Safety Data Sheet

Size (prices exclude VAT)
25 Litres - £80.00
5 Litres - £22.50

Quantity:

Water Seal - 10kg drum

Construction Chemicals Water Seal is used in situations where sealing against live water or grout movement is required.

Areas of use include plugging of concrete panels and joint sealing prior to grouting operations, sealing of basements, concrete pipes, sewage systems and foundations.

Features
- Super fast curing (within 1 minute)
- Ideal for plugging water leaks in concrete pipes and below-ground situations

Water Seal Detailed Information

Price: £63.10
excluding VAT

Quantity:

Kair Heat Recover Ventilator - KHRVF 100

Kair Trakmaster KHRVF100 Heat Recovery Ventilators provide a continuous air change, replacing stale
moisture-laden air with fresh, warmed air from outside.

When basements/cellars have been tanked and waterproofed condensation can often be problem, Kair
Trakmaster KHRVF100 will control these problems as well as condensation problems in small flats and bungalows and are an integral part of the Kair 'Hybrid' Heat Recovery Systems (See separate data sheet).
Features
- Meets Building Regulations requirements
- Up to 65% Heat Recovery
- Easy to install (no external access required - 102mm core drill)
- Whisper quiet Continuous running trickle ventilation
- Humidity sensor (preset or adjustable)
- Low running costs
- Tamperproof screws (See options for bit required for installation)
- Balanced or positive airflow
- Energy savings
- Security ventilationTM (no need to open windows)
- Health benefit - produces dramatic improvements of indoor air quality
- Continuous Running, Energy Efficient, Heat Recovery Ventilator For Flats, Bungalows, Kitchens and Bathrooms

Unlike conventional extractor fans which suck out and waste expensively produced heat, KairTM Trakmaster KHRVF100 Heat Recovery Ventilators recover up to 65% of exhaust heat, even when operating on boost mode. The world is becoming increasingly aware of the enormous cost of energy production, and this, plus the use of fossil fuels to generate power, is a momentous environmental issue. Extractor fans potentially waste over a million kilowatts of energy every year. This is comparable to the total output of two large power stations. Replacing conventional extractor fans with heat recovery systems could save at least half of that energy loss.

Kair KHRVF Technical Data Sheet

Price: £550.00
excluding VAT

Quantity:

Kair Heat Recover Ventilator - KHRVF 150

Price: £264.12
excluding VAT

Quantity:

Anti-Salt - 5 Litres

Anti-Salt is a Chloride and sulphate salt neutraliser that converts water-soluble salts into insoluble or hardly soluble reactive compounds.

As a result of this neutralisation, Chlorides and Sulphates, which are present in masonry, cannot be transported by the gauging solution used in slurry coat of tanking seal or to the surface of masonry. This, in turn, prevents salts transferring into tanking slurry when tanking below ground.

Features
- Anti Salt is ideal in barn conversions where salts from animal waste causes problems
- Effective against sulphates and nitrates

Anti-Salt Detailed Information & Health & Safety Data Sheet

Price: £53.80
excluding VAT

Quantity:

Tanking Membrane - 2m x 20m x 5mm

Platon Multi Tanking Membrane is a system for damp-proofing and waterproofing rooms and structures below ground level.

This highly impermeable plastic membrane acts as barrier to moisture, allowing you to have completely dry and fully versatile internal floor and wall surfaces and so make full use of cellars, basements or any other areas where dampness and moisture cause problems.

This mebrane can be dry lined on walls, screeded, or finished with a dry board system on floors. Particularly suitable for floors in industrial buildings, as it will transfer loading through screed layers to the underlying concrete floor. Allows contaminated floors to be upgraded.

Features
- BBA approved
- 5mm cavity drain membrane
- fast-track solution for walls or floors
- suitable for use above or below ground
- impermeable to water, gas and water vapour

Tanking Membrane Detailed Information

Price: £150.00
excluding VAT

Quantity:

Tanking Membrane with mesh - 2m x 10m

Tanking Membrane is a system for damp-proofing and waterproofing rooms and structures below ground level. This highly impermeable plastic membrane acts as barrier to moisture, allowing you to have completely dry and fully versatile internal floor and wall surfaces and so make full use of cellars, basements or any other areas where dampness and moisture cause problems.

Tanking Membrane Detailed Information

Price: £147.50
excluding VAT

Quantity:

Plaster Base Membrane - 2m x 20m x 5mm

Plaster Base can be installed on internal walls and vaulted ceilings above or below ground level. The substrate remains visible through the clear membrane for precise fixing. It is suitable for use with sand and cement renders and most lightweight and renovating plasters due to its unique undercut (dovetail) stud design creates mechanical key for plaster.

- BBA approved
- HDPE cavity drain membrane for direct plastering
- single component, no mesh or fabric layer
- unique undercut stud design creates mechanical key for plaster
- easy to cut, fix and seal
- impermeable to water, gas and water vapour
- compatible with other membranes

Plaster Base Membrane Technical Data Sheet

Price: £220.00
excluding VAT

Quantity:

Flooring Membrane P20 - 2m x 20m x 20mm

Flooring Membrane P20 is a high-capacity drainage membrane recommended for use on all floor applications below ground due to its ability to control free flowing water. The deep stud profile is designed to resist blockages caused by lime deposits.
- BBA approved
- heavy duty, deep studded HDPE cavity drain membrane
- principally used on floors
- for areas subject to high volume water penetration
- impermeable to water, gas and water vapour
- 20mm thick

Flooring Membrane Technical Data Sheet

Price: £289.33
excluding VAT

Quantity:

Double Drain Cavity Drain Membrane 2m x 15m x 7mm

Double Drain is installed with the filter fabric facing the backfill. It is fixed mechanically along its top edge using Platon-Cramp, which provides tear-resistant fixing-points. The moulding profile prevents entry of soil and stones between the wall and membrane or into the drainage layer.

Features:
- a membrane system for external basement walls which protects underlying waterproofing from backfill damage
- filter fabric layer ensures soil cannot enter membrane cavities to impede drainage

Double Drain Membrane Technical Data Sheet

Price: £236.67
excluding VAT

Quantity:

Platon Stop Flooring Membrane - 2m x 20m x 2.5mm

Damp Proof Underlay for wood and laminate floors laid on concrete

Wood Floor Membrane provides an effective, single-application damp proof underlay for wood and laminate floors laid on concrete. It's equally effective for renovation or new build projects and the tough polypropylene membrane can be laid directly onto a new concrete slab as soon as it is dry enough to walk on. With three times the water vapour resistance than film membranes, it eliminates the need to install a foam underlay. Construction height is only 2.5mm.

Depending upon the moisture content of the floor, Wood Floor Membrane is either fixed with damp resistant adhesive tape or a butyl rubber strip. The wooden flooring material can then be installed immediately.

Features
- No need to wait for concrete slab to dry
- Offers 3 times more water vapour resistance than film membranes
- Fast, single application
- Suitable for use under all wood and laminate floors including glue-free systems

Platon Stop Flooring MembraneTechnical Data Sheet

Price: £160.50
excluding VAT

Quantity:

Tanking Slurry - 25kg

Tanking Slurry Kit

SBR Bonding Agent

Water Seal - 10kg drum

Kair Heat Recover Ventilator - KHRVF 100

Kair Heat Recover Ventilator - KHRVF 150

Anti-Salt - 5 Litres

Tanking Membrane - 2m x 20m x 5mm

Tanking Membrane with mesh - 2m x 10m

Plaster Base Membrane - 2m x 20m x 5mm

Flooring Membrane P20 - 2m x 20m x 20mm

Double Drain Cavity Drain Membrane 2m x 15m x 7mm

Platon Stop Flooring Membrane - 2m x 20m x 2.5mm

Brick Plugs - pack of 100 - 10 x 75mm

Plaster Plugs - 8mm x 70mm - 500 per box

Plug Seal - 100 per pack

Sealing Rope - 10mm x 5mm - 10 per pack

Overtape - 115mm X 1mm x 25m

Sealing Tape 30mm x 2mm x 20m - 5 per pack

Corner Strip - 150mm x 1.5mm x 10m

Wall/Floor Junction - 10 x 2m

Brick Plugs - pack of 100 - 10 x 75mm

Size - prices exclude VAT

Size (prices exclude VAT)
5 Litres - £69.00
3 x 5 Litres - £65.90 each
8 x 5 Litres - £60.00 each
400cc cartridge - £12.50
3 x 400cc cartridges - £12.33 each
8 x 400cc cartridges - £11.20 each

Price: £45.00
excluding VAT

Number of Cartridges (prices exclude VAT)
One (£4.80)
Box of 12 (£4.20 per cartridge)
5 Boxes of 12 (£3.60 per cartridge)
11 Boxes of 12 (£3.25 per cartridge)

Tanking Slurry - 25kg

Tanking Slurry Kit

SBR Bonding Agent

Water Seal - 10kg drum

Kair Heat Recover Ventilator - KHRVF 100

Kair Heat Recover Ventilator - KHRVF 150

Anti-Salt - 5 Litres

Tanking Membrane - 2m x 20m x 5mm

Tanking Membrane with mesh - 2m x 10m

Plaster Base Membrane - 2m x 20m x 5mm

Flooring Membrane P20 - 2m x 20m x 20mm

Double Drain Cavity Drain Membrane 2m x 15m x 7mm

Platon Stop Flooring Membrane - 2m x 20m x 2.5mm

Brick Plugs - pack of 100 - 10 x 75mm

Plaster Plugs - 8mm x 70mm - 500 per box

Plug Seal - 100 per pack

Sealing Rope - 10mm x 5mm - 10 per pack

Overtape - 115mm X 1mm x 25m

Sealing Tape 30mm x 2mm x 20m - 5 per pack

Corner Strip - 150mm x 1.5mm x 10m

Wall/Floor Junction - 10 x 2m

Brick Plugs - pack of 100 - 10 x 75mm

Size - prices exclude VAT 25 kg - £57.205 kg - £16.50

Size (prices exclude VAT) 5 Litres - £69.00 3 x 5 Litres - £65.90 each 8 x 5 Litres - £60.00 each 400cc cartridge - £12.50 3 x 400cc cartridges - £12.33 each 8 x 400cc cartridges - £11.20 each

Price: £45.00 excluding VAT

Number of Cartridges (prices exclude VAT) One (£4.80) Box of 12 (£4.20 per cartridge) 5 Boxes of 12 (£3.60 per cartridge) 11 Boxes of 12 (£3.25 per cartridge)

Size - prices exclude VAT

Size (prices exclude VAT)
5 Litres - £69.00
3 x 5 Litres - £65.90 each
8 x 5 Litres - £60.00 each
400cc cartridge - £12.50
3 x 400cc cartridges - £12.33 each
8 x 400cc cartridges - £11.20 each

Price: £45.00
excluding VAT

Number of Cartridges (prices exclude VAT)
One (£4.80)
Box of 12 (£4.20 per cartridge)
5 Boxes of 12 (£3.60 per cartridge)
11 Boxes of 12 (£3.25 per cartridge)